I have two younger brothers, currently 7 and 9. Technically they’re not related to me but it’s a long story and for all intents and purposes, they are. I absolutely hate buying them presents for Christmas because it’s impossible to find something. First, they’re ridiculously spoiled. The amount of crap they have is astounding. Second, they destroy everything. Third, they don’t do anything except play video games anyway. Nothing irritates me more than spending money on something that isn’t going to get used. Last year I came up with a brilliant (and super cheap) idea: DIY Marshmallow Guns. I have no idea what tutorial I used but I don’t think it matters…they’re all pretty simple. We spent less than $5 on both of them and although I doubt they were used at all after Christmas morning, I’m totally fine with it for that price!
I scoured Pinterest and the internet for another DIY idea for this year. I never realized how difficult it is to find stuff like that for boys that age! Everything just seemed dumb. Finally I stumbled on DIY Fort Kits. I was on the fence about whether or not it would be used, but I never found a better idea so a Fort Kit it is!
I checked out just about all of the tutorials on the general Pinterest search above. I followed Pie Birds‘ tutorial the closest, but pulled ideas from other random ones that I added to it.
I made my list:
Everything was super simple to find except the sheets. I bought all of it minus the ribbon and sheets from the Dollar Tree…best store ever! I took it all of the original packaging and put it in some plain ziplock bags. I picked the ribbon up from either Hobby Lobby or Joann’s…I can’t remember for sure now. It was just two rolls of plain white grosgrain ribbon. Which I don’t know why I had 140 inches put down…I didn’t even end up using all of one roll! Darn, could’ve saved myself $3…
I looked everywhere for cheap sheets. Walmart, Target, Ross, Marshalls, Goodwill and 3 local thrift shops. They were all so expensive!! I mean come on Goodwill, who pays $5 for a used single twin sheet?! I finally struck gold at Big Lots and found a set of sheets on clearance for $7. And not just any sheets…CAMO! Perfect!!
Although flat sheets work so much better I decided that the fitted sheet would do. Especially since I’m not even sure if they’re going to actually use this kit beyond the first day. At first I was going to trim all around it, getting rid of the fitted part then folding the raw edges in and hemming it. I decided that was entirely too much work. Especially since I don’t understand why the fitted sheet won’t work, especially if you pull it tight.
First I cut the ribbon. I cut 6 pieces that were approximately 12 inches long. I folded them in half and then pinned them onto the fitted sheet.I sewed them on. I used a straight stitch back and forth across the top (at the end of the sheet) about 6 times to make sure it would hold. Then I zigzagged the other 3 sides to help keep the ribbon from fraying. I put one on each “corner” and one in the middle of each of the long sides.Done. In my search I found two ways to attach the ribbon: either in a loop, like I used above, or with two open ends so they can be tied. I had no idea which way would work better so I decided to make one sheet with loops and the other with ties. So for the flat sheet I cut 8 pieces of ribbon, this time about 20 inches each. I folded each piece into a V shape and pinned it on. I sewed them the same way as above: a straight stitch a whole bunch of times along the edge of the sheet and then a zigzag for the other three sides. I sewed one onto each corner and then one in the middle of each of the 4 sides.I had also seen a tip somewhere along the way that if you fold the corners in and sew them down it makes an opening for the rope to slide through. I decided to do that as well. Why not?Since this was a complete sheet set it also included a pillow. I debated for a few minutes and then decided I mine as well use that too. I cut it open on three sides so it was as big as possible, folded the edges in and sewed them closed. Then I cut four more pieces of ribbon, looped them like I did for the fitted sheet, placed them in the middle of each of the four sides and then folded the corners in like I did on the flat sheet for the rope to slide through.Sheets were done! Now I just needed a bag. Fortunately I’ve made a ton of those peek-a-boo storage bags for kids toys a couple years back so I already knew exactly how to make one (someday I’ll do a post on those. Maybe). It was even easier to make this bag though since it didn’t need a window. I went through my fabric file and picked out a camo print. I unfolded it and set all of my supplies on it to see how big I needed to make it. I made sure to cut it plenty big. Of course I have no idea what the dimensions are.Then I took all of the stuff off, folded it in half (right sides together) and sewed the side and bottom edges. It looked like a gigantic pillowcase.The downside to using this fabric was it turned out it was a jersey knit. Which meant it folded up on me. A lot. And I was entirely too lazy to pull out my iron to make life easier. See, this is why everything I sew turns out half-assed! I mean it would’ve taken me 2 minutes to pull out my iron, plug it in, wait for it to get hot and then use it. Lazy, lazy, lazy.
Next I made a casing for the rope at the top. This is where the jersey knit really irritated me. Normally I would fold the top edge down about a 1/4 inch and then fold it again to make sure that all of the raw edges are hidden, but that was impossible this time. So I just folded it down once and then zigzagged it instead. I left an opening about an inch wide about halfway on the front for the drawstring. Then I picked out some string. When a fabric store near me in Canada was going out of business I made sure to stock up on drawstring in a major way since I was making a ton of those peek a boo bags. Which meant that I had a bunch of options. I went with beige. I attached a safety pin onto the end to make threading easier and then pulled it through the bag. Normally I would attach the other end to the bag to make sure it didn’t get lost along the way, but I made the string so long that there wasn’t any fear of that. I have absolutely no idea how long I cut the string. Maybe about twice the width of the bag? I just know it ended up being barely enough. And that was it! The bag was finished! Turned out that for once in my life I drastically overmeasured! Once it’s all in there and closed the bag is only about half full. Which I’m perfectly fine with. Always better too large than too small!
I made a tag in my Silhouette program, printed it on regular printer paper and then laminated it using my awesome laminator. I punched a hole in it and attached it onto the bag. There we go, a Christmas present for two boys for less than $15 that’s original. It may or may not get used, but whatever! And I love this idea so much that I think as J and C get older we’ll be giving it to their friends as birthday gifts! Another win!