Image

Okay so Felt Mats are Just as Addicting as Quiet Books…

After making a road felt mat for C for his 2nd birthday I wondered if I could make a princess version for J.  In case you’ve forgotten (oh, if only I could forget…) she is completely obsessed with the Disney Princesses.  She has a bunch of these pop up board games that came with tiny princess figurines to play.  I think we played the games about a dozen times before she completely abandoned them and now just carries the princesses around with her everywhere.  Between those and her sets of felt people, I thought it would be fun to make a princess mat for her to play on!

I started off like I do with all projects:  Pinterest.  Unsurprisingly these aren’t nearly as popular as the car mats are.  I found three possible inspirations.  First, a Tangled one on My Decoupaged Life.  Although I loved it, I didn’t want to focus on just one princess story.  In retrospect I do kind of wish I would’ve got this route instead–made a small felt mat for each princess.  I just might do that down the road…

The second one I found was a little bit different.  Instead of focusing on the outside, All the Joy made the inside of the castle.  I stored this idea away for the future.

The one I relied on the most for ideas was A Girl and a Glue Gun.  I decided to make a mat that included something from each princess story.

One mistake I made was to make this project while J was home sick from school for a week.  I got a lot of input from her, which was both good and bad.  Like she wouldn’t let me include anything for Mulan, Pocohantas or Merida, even though that had been my original plan.  She’s only had the mat for a couple of weeks and she’s already complaining that they don’t have a home.  I knew I shouldn’t take advice from a 5 year old!

When making all of the buildings I referred to Google images for pictures of what they looked like in the movies and then did my best to replicate them.  I did a better job on some…  The animals especially turned out rather interesting…

I started off with a piece of dark green felt for the background.  I added a square of white for Elsa’s kingdom and dark brown for the woods.  Together those two were the same length as the dark green.  I cut a strip of light blue for the sky that was the same width as the dark green/white.  Last, I cut some dark blue for Ariel’s ocean.  I cut the top so it resembled waves.

I also wish I would’ve made it bigger.  I didn’t realize just how much larger C’s mat was until I had already cut the background felt for J’s mat and it was too late to make it bigger without having to scrap the pieces I had.  It didn’t need to be much bigger, but a little bit would’ve been nicer.

But here’s the final product, warts and all!

J requested the North Mountain first…no surprises there.  I made an Ice Castle for Elsa.  I used blue and white puffy paint to embellish it a bit and glued just one side of the door down so it “opens”.  I cut out a sleigh and Sven, a bunch of white triangles to represent mountains or snow mounds or something.  The light blue is a path for the princesses to walk on (J requested markings on the part leading up to the castle for stairs).  Marshmallow is guarding the castle and Oaken’s Trading Post is in the bottom corner.  diy-princess-felt-mat-north-mountainNext we worked on the woods.  I made a stream that leads to the ocean.  There’s a bridge that crosses over it.  The woods are supposed to represent Pocahontas, Merida, Snow White and Aurora all at once.  J requested a bench, an owl, squirrels and the three fairies from Aurora (just in case you were wondering what the hell those shapes were, hahaha).  The orangish/brownish felt is the path.diy-princess-felt-mat-woodsThe ocean scene was up next.  This one turned out to be waaaaay to spacious.  I should’ve made Ariel’s castle a lot bigger, but I didn’t realize how small it was until I had already glued it together and I didn’t feel like starting from scratch.  But this section has Ariel’s underwater palace, Eric’s ship, sunken treasure (I just needed something to throw in there!), Sebastian, Flounder (not sure where he is…), Ursula and her lair.  I also made Flotsam and Jetsam but by the time I was ready to glue the underwater scene down I had lost them.  I think they ended up getting swept up with all of the other felt scraps.  I haven’t gotten around to making another one set of them yet.  diy-princess-felt-mat-ocean

And then the rest of mat all crammed together.  Aurora’s cottage and spinning wheel.  A bookstore and fountain from Beauty and the Beast.  The Snuggly Duckling, tower and cave from Tangled.  The Wishing Well from Snow White (J had me add a blue sapphire ring at the bottom.  There’s a short story about Cinderella we read once where she lost her ring in the well and the mice had to retrieve it).  A pumpkin and carriage from Cinderella.  Tiana’s Palace (which I had to fight J tooth and nail so I could add it).   The magic carpet from Aladdin.  And, most importantly, Cinderella’s castle.

diy-princess-felt-mat-kingdom

I also added a back to the mat.  Since I used a bunch of different felts to make the different backgrounds I figured it would help to make it roll up easier.  Although really this mat isn’t large enough to roll.

I finished the edges of the front and back with some ribbon.

Voila, finished!  J uses it all of the time, just like I thought she would.  I really am considering making a different mat for each story.  Hmmm, maybe I’ll start that right now…

j-quiet-book-cover-4
Image

The Original Quiet Book, Part Four. Hooray!

Okay, this is it!!!  My last three quiet book pages I made for J’s original quiet book (check out parts one, two and three if you haven’t already), the cover and some general musings about the whole process.

Mailbox page is up next.  quiet-book-original-mailbox-page-2 quiet-book-original-mailbox-page-3 quiet-book-original-mailbox-page-4This one is a two-parter.  The left page has a pocket to hold a few markers/pens and a pocket for a small notebook.  The opposite page is the mailbox.  These pages are everywhere so you really shouldn’t have a hard time finding one you like.  I modeled the pocket page off of this post and the mailbox from this one.

do not like these pages.  The pen and notebook both fall out of the pocket all of the time.  And the mailbox is junk.  Which is due to my novice quiet book making status and sewing skills, not to Imagine Our Life’s instructions in the slightest!  As you can tell from the picture below, my button and ribbon combination did not work well.  J was never able to loop the ribbon behind the button, which I’m not sure if that’s due to the button being too small or the ribbon too thick or what.  Either way the ribbon is falling off now.quiet-book-original-mailbox-page-1Technically the rest of the page works but I just don’t like how it looks in general.  I made a similar page for Nolan’s quiet book, which I think turned out much better.  You can read about it here.mailbox-supplies-quiet-book-page-2 mailbox-quiet-book-page-2I need to ask Amanda how everything is holding up, and if it’s good then make a carbon copy of that page for C.  And in J’s new quiet book just include a place for a small notebook and pack of crayons to be stored somewhere.  You’re never too old to color!

The next set of pages are two that I added a bit down the road.  When she was 3 she was absolutely obsessed with playing doctor for about 6 months.  And I mean totally obsessed.  The moment Hubby walked in the door until bedtime that’s all she wanted to play with him.  She has a My Life doll we named Wendy and poor Wendy was constantly in fires and needed to be fixed up.  It’s been two years since she’s asked Hubby to play it with him and I think he’s still burnt out on it.  But I thought a Doctor’s Kit would be a great addition to the book.
quiet-book-original-doctors-kit-page-2 quiet-book-original-doctors-kit-page-1Ugh, this is another one that makes me cringe when I look at it.  I couldn’t find anything online that I liked and apparently this is what happens when I design a page myself.  On the left page I figured out a way to attach the stethscope.  I took four rectangles of fabric about the same size, added velcro to each end and sewed half of each one directly onto the page.  And then you simply slip the stethoscope piece into the flap and fold the other end over and secure the velcro.  It works really well.  The thermometer doesn’t actually go there (all of the loops are for the stethoscope) but J must’ve popped it over there at some point.

The opposite page is just three pockets to hold doctors supplies.  The only thing that I found in there now is some gauze, but it used to hold a thermometer, a medicine dropper, a reflex hammer, an eye-checker-thing (obviously that’s it’s official name), gauze, two of those huge bandage things that you can use as a cast/wrap your ankle/sling/etc, and some bandaids.  Oh and a few surgical masks.  All of the stuff I either bought from the Dollar Tree or was duplicates of what she had in her doctor’s kit at home.  And let me tell you:  bandaids are a brilliant idea for keeping toddlers occupied either at home or in the car.  J would spend hours putting bandaids on herself, her stuffed animals and us.  Of course she was a good kid and all we had to do was tell her one time that bandaids don’t belong anywhere else except those three places and she remembered (and followed) that forever.  Other kids may not be so good…

Although this page is perfectly functional I hate the fabric that I used.  I tried and tried to find some doctor’s-type fabric but to no avail.  I had a bunch of this crappy yellow stretch knit and figured it’d work fine, which it does…it’s just not appealing.  And this is another example when it was a waste to use up two pages.  One would have been sufficient.

I made a similar page for Nolan’s quiet book, which turned out much better.  Minus the fact that I majorly messed up the pocket so all of the stuff is going to fall out, hahaha.  If C gets into the doctor thing I’ll make a page like that for him instead.  You can see how I made it here.quiet-book-doctors-kit-page-6Last but not least, the rainbow and name page! quiet-book-rainbow-and-name-page-2 quiet-book-rainbow-and-name-page-2 quiet-book-rainbow-and-name-page-1This one is okay.  I got the idea for the name here.  I saw a few sites where I could’ve used velcro instead, but that seemed too easy and there was a ton of velcro throughout the rest of the book, so I wanted something else.  I think the buttons were too hard for J though, because she only ever laid the letters on top.  And although I liked the idea of felt rainbow and thought it looked really neat, she only put it together once or twice.  Either because she didn’t care or it was too difficult for her.  Obviously she knows how to write her name now so this page can go into the garbage.  I’ll probably make one for C down the road but find a different way to attach the letters.  Maybe snaps?  Nolan will get a page like this first so I’ll experiment on him 😉

So that’s it for the pages.  Let’s talk cover now.  I researched the crap out of how to make a quiet book cover.  It’s been so long since I’ve made it that I really can’t remember much about it…except that I cried and seam ripped a lot.  One thing I know for sure is that I did not like the ribbon for handles.  It isn’t sturdy enough.  Otherwise the cover is okay.  I put a ton of pockets on there, which is good since a lot of my pages wouldn’t actually hold the pieces so I needed some extra storage, haha.  j-quiet-book-cover-4 j-quiet-book-cover-5 j'-quiet-book-cover-1j-quiet-book-cover-3 j-quiet-book-cover-2This one and this one are two of the four blogs that I have saved that the links still work that I used as a reference…I have no idea what I took from where.  However, you can read all about how I made Nolan’s quiet book cover here.  That should help tremendously if making your own.

General thoughts:

  1. Hate the ribbon as a handle for the cover
  2. The pages are too big.  I think I went with 12×12?  So once they were finished about 11×11.  Although great when spread out on the floor, it’s just not practical in the car.  Way too big.
  3. Felt, iron-on Heat n Bond and muslin are not friends.  As you probably noticed while looking at my pages, a bunch of the felt letters fell off.  Which is fine…in retrospect the pages didn’t need titles anyway.  Now ironing fabric on with Heat n Bond works great.
  4. Close/secure all pockets.  It doesn’t matter what’s being stored in it or how big it is, it’s going to fall out.
  5. 3/8″ grommets are way too big for the pages.  I couldn’t find anything smaller until I finally bought my Crop-a-Dile, which uses eyelets instead.  Game changer.
  6. Making quiet books is extremely addictive.  Going through and writing these posts have made me itching to make some more pages.  We currently have three books:  J’s Original Quiet Book, the ABC Quiet Book and a mini Baby Quiet Book (that C never played with even though I tried my hardest to get him to.  Bastard.)

I think that’s it!  Hope you learned lots of what-not-to-do things and got some ideas on pages that might work for your little one!  Check back to see future posts about the ABC and Baby books!

quiet-book-page-goodnight-house-2
Image

The Original Quiet Book, Part Three

Almost finished with J’s original quiet book, I promise!  Just this post and then one more.  You can check out parts one and two for more ideas!

Super easy one:  bead counting.quiet-book-counting-pageI got the idea from here.  I have a huge thing of beads so this was a great way to use them up.  I also added her name since I have a bunch of letter beads as well.  I don’t think she ever really played with it, but I can’t remember for sure.  Either way she’s been past that one for quite awhile now.  It’ll go into C’s book for sure.

Money page next.  Another one of my favorites!! quiet-book-money-page-3 quiet-book-money-page-2 quiet-book-money-page-1Once again it’s easy to tell that I used this blog for my inspiration, haha.  I really didn’t have any creativity when making this first book!  Although I did add something completely different that I didn’t see anywhere else:  the money sorting pockets at the bottom.  The downside to those, however, is that the money doesn’t actually stay in there.  Yet another time when I should’ve used velcro or snaps or something.  Fortunately it can be stored in the pig instead.  I also should have reinforced the slot where the money goes in.  Like by making it an actual buttonhole!

This is another one that J never really played with and once again I’m not sure why.  I think that I’ll just move it over into a new quiet book for her though.  She’ll start understanding money a lot more in the next couple of years and this would be a great learning tool!  I just need to see if I can hot glue some velcro to the money pockets.

This one makes me shudder every time I look at it.  Great idea in theory but the end result just didn’t turn out well.  A Walk the Dog page.

dog-quiet-book-page

quiet-book-original-dog-page-1I used this post for the idea but made my dog a bit differently, opting for his whole body instead of just his head.  I picked up the leash and collar from the dollar store.  I sewed the collar down so it could still open and close but couldn’t be taken off the whole way.  I trimmed the leash waaaaay down, made a loop for the handle and added velcro to attach it to the page.

This is another one that I don’t think J ever used.  It’s also going in the garbage just because I can’t stand the way it turned out.  I made one for Nolan’s quiet book, modeled to look like their dog Stetson.  I think it turned out much better and would make something similar to go into C’s book.  You can read all about how I made that page here.

quiet-book-dog-page-nolan

Next up:  Goodnight House!  Another one that I really like.  quiet-book-page-goodnight-house-2 quiet-book-page-goodnight-house-1Finally, a completely original idea!  I thought it would be really cute to have a page where she could put everyone in the family “to bed”.  I printed off our heads and attached them to cardstock bodies.  I printed off something similar to our pjs and pasted them on top.  Then I laminated the whole thing.  This is before I got my super cool laminator and was just using those sheets you can buy and just stick together yourself.  Hence why they look a bit funny.  I then glued them onto popsicle sticks.

I cut out 6 rectangles in different fabrics for our beds, folded the raw edges in, sewed the top down and then attached them to the house.  For the house I sewed on a white fabric square and red fabric triangle (obviously my measuring skills were a bit off since the roof is smaller than the house LOL!).  I added a moon and done!  Unfortunately the popsicle sticks never stayed in very well.  The pockets need to be deeper and wider (in order to fit our fat heads).  Either that or they need to be stored in a separate pocket somewhere.  I could probably add a zipper to one of the sides of the house for storage.  I don’t actually have to redo this page yet (since we’ll have three kids but only two dogs so the number of beds is good.  One of us will just have to sleep in the dog print blanket 😉 ), but I do need to update/fix the people.  Poor C doesn’t have a head since he wasn’t even born when I made this page, haha!

Okay, check out Part Four next week for the final installment!

quiet-book-seasons-page-2
Image

The Original Quiet Book, Part Two

Don’t judge me on the quality of these pages.  I made this book for J about 3 years ago and although my quiet book sewing skills may not be extraordinary and amazing now, they’re definitely a lot better than when I started out.  I love the idea behind most of these pages…just not the application, haha.  You can check out some of the other pages in Part One.

The Seasons page.  This one is actually one of my favorites.  J never really got into it, although I don’t know if it’s just because she was too young or there were too many pieces or what.  But I absolutely love this page.  quiet-book-seasons-page-3 quiet-book-seasons-page-4quiet-book-seasons-page-5quiet-book-seasons-page-2 quiet-book-seasons-page-1This post and this post were my main inspirations for this page.  I made the grass into a pocket but didn’t put anything across it to keep the stuff in, so I ended up shoving it all into the pocket on the back cover, which has velcro on it.  Fortunately I managed not to lose any pieces!  (The “spring” and “summer” labels were just never finished in general, haha).j-quiet-book-cover-2Remember in Nolan’s ladybug quiet book page I said I had a bunch of snaps leftover from a previous project?  The project that made me cry several times because I kept on hand sewing the snaps on incorrectly?  Well this is the one.  I used 4 different sizes of snaps.  For the first size I made a snow cloud, a rain cloud and a regular cloud.  The second size were a sun and a moon.  The third size were the things that went onto the tree:  spring flowers, summer leaves, fall leaves and snow.  And the last size was the name of the season.  That way she couldn’t snap the leaves in the sky or anything like that.  Maybe that’s part of what made it so confusing for her?  Although I really do think she never played with it just because there were so many pieces it made it hard to do in the car.  And she just didn’t understand/care enough about the idea behind it.  Either way I’m keeping this one for a future book just because of all of the effort that went into it!

The next one never ever got played with.  It’s going straight into the trash.  It’s a combined hair and face page.quiet-book-make-a-face-pageI was going for something like this.  I don’t know what happened, but mine just didn’t turn out very nicely.  I don’t know if it’s because the head’s too small or the hair too long or if the face pieces I made were just creepy looking.  Regardless, J never played with this page, either with the hair or the Make a Face pieces.  I think it’s hilarious that even though she never played with it, almost all of the pieces are missing.  How did that even happen?? Definitely the garbage for this one!

Dress-up closet.quiet-book-getting-dressed-page-2 quiet-book-getting-dressed-page-4quiet-book-getting-dressed-page-1quiet-book-getting-dressed-page-3It’s easy to tell that I used this blog and this blog for inspiration here!  I wanted to put two people on there instead of just one, so I used Serving Pink Lemonade’s template for the size instead.  I also used this blog to make a few princess dresses.

I remember when I was making this page that I cut out two tan people, but when I went to sew them on I could only find one.  By that point I was out of skin tone felt, so I cut one out of dark brown instead.  And wouldn’t you know it, as soon as I sewed both of them down I found the missing person.  So I just shoved it in the closet with the rest of the clothes so she had a third person to dress.  Looking at the picture I can tell that some of the clothing is missing.  There used to be a full firefighter outfit (she was obsessed with firefighters for the longest time), along with a couple of princess dresses and some shoes.

That’s another one that I’ll just get rid of.  She has another dress-up page in the ABC quiet book that’s just one big person and she plays with that one a lot more.  Of course that’s probably because it’s filed under the letter Q for Queen, so it’s only princess dresses and witch outfits, haha.  But the fabric I used on the closet wasn’t a good one and it’s fraying like crazy so you can only unzip it about 3/4 of the way now.  Now she did play with this one quite a bit, but I don’t see C being too into it in the future.  He’s more of a truck and train guy.

Next up:  laundry day!  This is another one of my favorite pages.  Even if there are only 3 socks left, and none of them match hahahaha!quiet-book-laundry-page-3 quiet-book-laundry-page-2I had two websites listed for inspiration, but only one of the links still works, this one.  This is the one that I followed the directions to make the washer, but not the clothesline.  I really liked the idea I saw somewhere else of making a clothesline with mini clothespins for the socks to hang up on, so that’s what I did.  J played with this one a decent amount.  And fortunately it’s one that I don’t really have to do anything to in order to keep it…minus cutting out some more socks haha!

Another easy page:  match the colors.quiet-book-match-the-colors-balloon-page-original quiet-book-match-the-colors-balloon-page-originalHere’s my inspiration post.  This is another one that I had two websites listed, but only one link currently works.  I liked the idea of doing balloons and shapes, so I decided to combine them.  This page ended up being a bit confusing for J because some of the ribbons didn’t quite match up with the felt colors.  Like the best I could do for light brown was that blue ribbon with a dark brown stripe (in the bottom photo it’s the one with the red heart on it).  I think it  confused her since some of the shades were different.  Hmmm, maybe my child isn’t the smartest on the block… Just kidding!

I made a similar page for Nolan and I think that one turned out much better.  quiet-book-match-the-colors-balloon-page-finished-2That’s it for now.  Check out Part Three next week!

diy-disney-villain-footprint-art-15
Image

You can’t have princesses without some villains!

So awhile back J and I made all 13 Disney princesses from her footprint (you can read all about them here).  disney-princess-footprint-craft-finishedShe immediately asked if we could also make all of the villains and princes from each story, but I vetoed her.  It took like 10 seconds of her time for this project, while I had to paint all of the hair and embellishments.  And since I majorly procrastinated doing that this project actually took a few weeks to complete.

Fast forward a few months and we were predicted to get several inches of snow in southern VA.  I remember when 4 inches fell down here last winter school shut down for a week and a half so I wanted to be prepared just in case.  I figured making the villains was an easy project that would make her happy and kill some time.  I picked up a piece of poster board and we were ready!  And thank goodness I did.  We ended up getting about a foot of snow and school was out for 6 days.  Projects were a necessity.

Last time I pretty much copied the princesses from a tutorial but this one was a bit more unique so I made them all up.  I googled each villain before painting her foot so I knew exactly what they were wearing.  I painted her foot, keeping the right side for all of the villains wearing black (which was about half) and the other side for any other colors. diy-disney-villain-footprint-art-17It turned out that I was out of red, which at the time I didn’t think was such a big deal.  I had no idea how many villains wear red!  I ended up just using a glitter paint that was sort of red and sort of pink and called it a day.  They don’t need to be perfect.

I pushed her foot down on the posterboard for each villain.  diy-disney-villain-footprint-art-18Let’s see if I can remember who’s who.  Starting at the top left it goes:  Ursula, Evil Queen, Lady Tremaine, Mother Gothel, Maleficent, Hans, Gaston, mess-up, mess-up, the bad guy from Tiana whose name I still don’t know (she doesn’t like that movie so I’ve only seen it once, haha), Shan Yu, Governor Ratcliffe, Jafar and Mordu.

The following day we embellished them.  I did the hair and crowns while she added anything that was needed onto the clothing.  Last time I didn’t let her help (not really sure why…) but this time she begged me to.  She did a great job! diy-disney-villain-footprint-art-19Then I cut around them with speciality scissors and used a hole punch for holes in the tops and bottoms of each person.  She divided them into 3 piles of 4, put them in the order she wanted them and picked out ribbon for each strand.  I weaved the ribbon through the hole, connecting the four villains together.  Here they are individually.

diy-disney-villain-footprint-art-2

Jafar

diy-disney-villain-footprint-art-3

Shan Yu

diy-disney-villain-footprint-art-4

Gaston

diy-disney-villain-footprint-art-5

Mother Gothel

diy-disney-villain-footprint-art-6

Ursula

diy-disney-villain-footprint-art-7

Govenor Ratcliffe. Who, in retrospect, should’ve been a lot fatter.

diy-disney-villain-footprint-art-9

Evil Queen

diy-disney-villain-footprint-art-10

Lady Tremaine

diy-disney-villain-footprint-art-11

Hans. Those are supposed to be sideburns but didn’t turn out so well, haha.

diy-disney-villain-footprint-art-12

Mordu

diy-disney-villain-footprint-art-1

Malificent

I cut another piece and made a loop to hang them up and voila, finished! diy-disney-villain-footprint-art-16 diy-disney-villain-footprint-art-14 diy-disney-villain-footprint-art-13We hung them up in between the princesses in her room.diy-disney-villain-footprint-art-15She hasn’t asked about the princes yet, but I’m sure it’s coming.  Next time there’s a snowstorm we’ll work on those guys 😉

quiet-book-5-little-monkeys-page-3
Image

The Original Quiet Book, Part One

Okay so I’m about to slam you with posts about quiet book pages.  I’m actually writing a lot of these posts in advance and then scheduling them to publish automatically over the next few months.  I’m 8 months pregnant with our third child and am assuming that once he or she (we’re not finding out the sex this time and I love it!!) pops out, this blog is going to be the least of my concerns.  So I figured I’d stock up on a bunch of quick and easy quiet book posts and give myself some breathing room.  Especially since I’m also not currently involved in any projects and one of my goals for the last two years has been to revamp our quiet books.  I’m hoping this will be the motivation I need!

I can’t even remember now how I stumbled on quiet books.  I made J’s first one about 3 years ago and immediately became addicted.  You can tell that this was my first attempt and that I was just getting back into sewing after taking a 10+ year hiatus.  Not that my more recent pages (like Nolan’s quiet book) are amazing and awesome, but you can definitely see the difference in quality.  Hence why I want to revamp this one.

Fortunately I created a Word document that lists all of my pages, the inspiration pages I used to create each one and the materials I needed.  That’s going to make blogging about a project I did over 3 years ago ten times easier!  And I’ll be able to give credit to others where it’s due…I was wondering how that was going to work.

So this is the order the pages are in the Quiet Book.  First is a pirate treasure chest page.  quiet-book-pirate-page-3 quiet-book-pirate-page-2 quiet-book-pirate-page-1As you can tell, this one needs a lot of love.  I had seen a ton of lock and key quiet book pages when doing my research and I thought the idea of a pirate’s chest was neat.  I could put “treasures” like necklaces, gold coins and, for longer car rides, lollipops/other treats.  This and this example were my primary inspiration for my final product.  I didn’t want to “waste” two pages so I combined it all into one by nixing the treasure map.  I used this tutorial to make the pirate patch, which belongs in the chest.  I winged making the sword, which as you can see didn’t go too well.  The handle is super flimsy and I didn’t make the pattern pieces big enough to flip them so the raw edges were inside.  And I had some issues getting it to stick on the page.  There used to be a lock and key, but the red X I made wasn’t exactly great and the key wouldn’t actually stay inside.  And eventually the ribbon completely broke off so I had to remove the lock as well since the chest was now impossible to open.  J never really got into the pirate thing, so minus checking for candy every time she used her book (which 9 times out of 10 I forgot to put some in…) she never used this page.  I may or may not revamp this one for C…I haven’t decided yet.

Next is 5 Little Monkeys, which is actually one of my favorite pages.  J really enjoyed this one as well.  Definitely a keeper!quiet-book-5-little-monkeys-page-4 quiet-book-5-little-monkeys-page-3 quiet-book-5-little-monkeys-page-2 quiet-book-5-little-monkeys-page-1This one is actually still in pretty good shape.  One of the monkeys is lost and the number 2 pillow is missing its number, but other than that it’s good!  When I made the finger puppets originally they were too small, so I had to make another set down the road.  And of course those ones were too big.  I really despise making finger puppets.  That’s one of those things I’d just rather pay for!

I used this tutorial for the telephone.  I thought it would’ve been cool to find an old school telephone cord, but I couldn’t find one anywhere so I just stuck with ribbon instead. I used my Silhouette to cut numbers out of felt for the pad.

I really loved Imagine Our Life’s 5 Little Monkeys page but there was absolutely no way I could do anything that elaborate, so I dumbed it down for my skill level.  I loved the idea of having the monkeys tuck into the bed and that they each have their own spot.  I used my trusty Silhouette to cut out the numbers for the monkeys and pillows.  And then the damn things wouldn’t stay in the bed, so I ended up hot gluing velcro inside the bedspread to hold them in place.  For the monkeys I followed these instructions, just adding bellies and tails.  I even matched the googly eyes with the numbers!

Next up:  counting petals.  quiet-book-flower-page-2 quiet-book-flower-page-1I followed Serving Pink Lemonade‘s directions and used her template to make this page.  Except I have 10 instead of 8, so I must’ve resized it since my pages are bigger.

This one is a very straight forward page that, amazingly enough, is still intact.  Although I think it’s funny that the number 2 is missing, which is the same number from the 5 Little Monkeys page!  I did go back and draw the outline of the petals onto the flower since J was too young at that point to know which order they went in.  Looking back on it now, it really doesn’t matter if they were right or not.  I should’ve left it alone and she could order them however she wanted until she was old enough to look at the numbers and figure it out herself.  I don’t think J ever used it all that much, but since it’s still in working order I’ll keep this one as well.

Tie Your Shoes page.  quiet-book-tie-your-shoes-page-2 quiet-book-tie-your-shoes-page-1I relied on this tutorial for my instructions and template.  Totally not her fault mine turned out so crappy, haha…my sewing skills were just majorly lacking.

This one definitely needs to be thrown out and completely redone.  I like the background fabric that I used, but that’s about it.  The grommets are huge (this was early in my quiet book addiction so those are the only size I had.  And I hadn’t even heard of the magic Crop-a-Dile, which was going to make my addiction sooooo much easier!).  J was definitely way too young for this page.  I’m thinking about starting a brand new book for her with much smaller pages, and if I do this would be one of them.  Now that she’s 5 shoe tying is going to be an important skill.  Or I could just make one of those shoe tying boards.  Although then again, the kid refuses to wear sneakers and if this trend continues she won’t “need” to learn how to do it until she’s like 15.  Seriously, whose child is she?!

Okay, last one for today.  The fishing pages.quiet-book-fishing-page-2 quiet-book-fishing-page-1The link I used for my inspiration is now broken, so that blog must not be around anymore.  But I cut fish out of felt (they’re so realistic looking aren’t they 😉 ) and hot glued paper clips onto the back.  Then I made a fishing rod from a small dowel rod, tied (and hot glued) a piece of yarn around it.  I cut two worm shapes out of felt, put a magnet inside and hot glued it together and then onto the end of the string.  I made a pocket for the fishing rod, but as you can see since the rod is missing, it didn’t work all that well.

I know, these two pages are totally redundant.  I thought it would be a neat idea to have her “catch” the fish in the ocean and then put them in the goldfish bowl.  What a waste of space.  I mean she did use this page a decent amount, but not enough to justify taking up two pages.  I do like the idea of it and this would definitely be a page I would redo in the future for C.  Except I would make only the ocean scene.  And I would either make the sand on the bottom a pocket to store the fish and rod, or do what I ended up doing and making a special pocket on the cover just for the fish (the bottom one with the fish on it.  Obviously). j-quiet-book-cover-1So that’s it for today!  Check back next week for more pages in Part Two!

diy-thankful-tree-2014
Image

Thankful Tree

What better time for a post about a Thanksgiving project than in February?  Between Nolan’s quiet book pages and all of my Christmas projects apparently I missed blogging about this! Which is a shame since it’s one of my favorite traditions J and I started.  I’m just happy I realized I overlooked it.

So towards the end of October 2014 I decided I wanted to find a way for J to talk about the things she’s thankful for.  Do any of your friends on Facebook do the “thankful post” every day in November?  It was really popular a few years back, but now almost no one does it.  I still do and it’s my favorite time of year.  Of course I think the generic ones that are thankful for “family” and “friends” and “health” are all boring, so I find fun ways to express my gratefulness for life–things like hot dogs to keep my St Bernard in check when he sees kids/dogs/cats/squirrels while on walks or Google for answering my questions like “why will my 4 month old not sleep more than 30 minutes at a time?!”  I always do a serious one on the last day of the month, but I think it’s fun to come up with creative ideas.  Especially because that’s what makes life so great–all of those small things that you never really think about.  I really and truly am grateful for hot dogs and their amazing power over my Saint.

So I wanted to find a way to do something similar with J.  I finally settled on an idea I had seen floating around online:  a Thankful Tree.  Except I wanted to do it completely differently. We would draw a giant tree, paint it and hang it on the wall.  J could pick 30 neat looking leaves from outside.  Each day she would tell me something she was thankful for, I would write it on the leaf and then hang it on the tree on the wall.  I LOVED it!  Here’s a picture from our first Thanksgiving doing this, so an almost complete tree.  diy-thankful-tree-1I used clothespins to attach the leaves onto the tree (which I completely forgot I did!  I used tape last year, which did not stick.  I’ll have to try to remember to go back to clothespins this year).  One thing I did not like was using real leaves.  Neat idea, but not practical…what happens to leaves after they fall off the tree…um, they turn brown and crackly.  Duh.

Once November was over I had J make a turkey book.  I wanted it to look like this, but J put her own spin on it which I’m more than fine with–in fact I prefer it!  She’s going through a phase right now where everything has to look exactly the same as the craft that I show her and it bugs me.  Use your creativity to make it your own girl!  I cut out pieces of different colored construction paper for the book and held it together with pipe cleaners (J’s idea.  I’ve added staples to it since then).  Then I wrote one thing she said she was thankful for on each page, that way I can look back on it years from now and laugh that she was thankful for things like “balloons” and “breakfast”.  That’s my girl! diy-thankful-tree-5 This year we made another thankful tree.  I mixed the paint a bit better so it turned out more brown and less purple, hooray!  diy-thankful-tree-2diy-thankful-tree-3I wrote “Jordan is thankful for…” in block letters down the tree and let her color them in.  And then instead of using real leaves I cut out 30 leaves with my Silhouette in 5 different shapes and 4 different colors of cardstock–red, yellow, orange and brown.

Then for our family activity we all painted them to give them a little extra “something”.  diy-thankful-tree-1diy-thankful-tree-4Since C has a tendency to eat paint I tried out another homemade paint recipe, this time this one from Learning 4 Kids.  Look at those colors!  And the consistency was pretty cool.  J, of course, refused to use her fingers and insisted on using a paintbrush instead.  She loathes being dirty.homemade-paintThis one was a lot more successful than the one we tried out at Halloween for pumpkin decorating–he had a taste or two and then must not have enjoyed it because he actually stopped eating and instead painted himself, us and a little bit of the leaves.  Keeper!!!!!C-paintingWe set the leaves out to dry and then once November rolled around I asked J what she was thankful each day.  I used colored Sharpies to write them down and then she taped them to the tree/wall with Scotch tape.  Which, like I said earlier, did not work.  At least half of them were on the floor by the end of the month. diy-thankful-tree-2015I’m ashamed to say that I didn’t keep up with asking her after Thanksgiving, so she was about a week short on thankful things.  I definitely need to get better at that next year.  I was going to have her make another turkey book but when looking at the one from the previous year I saw how much space there was on each page, so I figured I’ll just keep adding to that instead!  I’ll write every year in a different colored marker and then make a key on the back front cover.  Brilliant!  diy-thankful-tree-6These were my favorites from 2015:  “tray lunch” and “everything in the world…except Roman” [our dog].  Oh J.

This is seriously one of my favorite traditions.  I can’t wait until C is old enough to start and we have twice as many leaves on the tree.  I just think it’s a great lesson to teach kids–doesn’t matter how big or small, but find one thing every single day to be thankful about.  Because life is precious and we need to appreciate every single thing that we have.

quiet-book-doctors-kit-page-6
Image

Is there a Dr. Nolan in the house?

The next quiet book page I did for Nolan’s Christmas present this year was by far the easiest page ever:  a doctor’s kit.  All I did was sew a giant pocket onto the page and fill it with extra supplies from J’s doctor’s kit (I don’t know how but she ended up with like 4 of some things.  I’m just glad to be rid of them!).

I chose some red and white polka dotted fabric.  I cut it so it was about the same width as the page and slightly shorter.  I turned all four sides in and ironed them down, hoping to make the edges straighter.  It worked somewhat.  I sewed the top edge down first, then pinned the box on the page and sewed the other three sides down.quiet-book-doctors-kit-page-4Next, the flap.  I cut a rectangle out from the same fabric that was slightly longer than my pocket. I did the same thing as above to make the rectangle straighter (and hide the raw edges):  folded each side under, ironed it and then sewed around the two sides and bottom.  Then I cut three pieces of red velcro and sewed them on the flap.  I knew (from past quiet book pages) that one wouldn’t be enough to keep all of the crap from falling out.quiet-book-doctors-kit-page-2quiet-book-doctors-kit-page-5And then I realized I made a colossal mistake.  I didn’t sew the other part of the velcro on the pocket before sewing it onto the page.  Sh*t.  And then I took a Nikki shortcut.  Which I always regret doing.  And even though I know I’m going to regret it, I always do it anyway because at that moment in time I’m just too lazy to fix the problem properly.  So instead of either taking the pocket off of the page, sewing on the velcro and resewing the pocket back on or just figuring out a way to get the velcro on there without using the seam ripper (which since this pocket was so large would’ve totally been doable)–I opted to sew the velcro straight onto the page.  I figured, hey, that’ll still work! quiet-book-doctors-kit-page-3Yeah, it doesn’t.  At all.  I’m a moron.  So I’m going to tell Amanda that if the stuff keeps falling out to just get a safety pin and anchor it in that way.  Or something.

I matched the velcro pieces together and sewed the top of the flap onto the page. quiet-book-doctors-kit-page-1And that’s it!  I added the items we have doubles of:  a shot, a thermometer (which I just realized looking at this picture that it’s not in there.  Hmm, I’ll have to figure out what I did with it…  It probably fell out of the damn page and is laying on the floor somewhere.  Ha ha.), a stethoscope, an eye thing and a knee banger.  J was also obsessed with putting bandaids on things for the longest time.  Seriously, I’d give her a box of bandaids on a long car ride and she would spend 30 minutes opening them and sticking them on her stuffed animals.  I figure he’s still a bit young for those, but I’ll give Amanda a heads up so she can add those too when the time comes. quiet-book-doctors-kit-page-6

Yay, two pages down!

quiet-book-wheels-on-the-bus-page-2
Image

The Wheels on the Bus Go Round and Round…

For my final quiet book page for Nolan’s Christmas present I decided to go with a Wheels on the Bus idea.  I have a Busy Bag that I made for J about 3 years ago and I wanted to go with a similar idea for Nolan, except in his quiet book.  All I did for the Busy Bag is cut out a bus from cardboard, design a bus in my Silhouette, print it off and glue it on and then glued strips of velcro on the windows.  Then I cut out pictures of family and friends and glued velcro on the backs.  Voila, now she could have friends and family members ride the bus!toddler-bus-busy-bag-She absolutely loved it.  So much so that it’s now falling apart.  A lot of the family members are missing, some of the velcro has peeled off of the backs of the pictures that we do have left and the bus itself is starting to come apart.  C is just about old enough to start playing with it himself so I’m going to update it here soon.  You can read more about the Busy Bag Bus here!

I googled and Pinterested (is that a word?  If it’s not already I’m sure it won’t be much longer until it is!) Wheels on the Bus quiet book pages but never really found anything that I liked.  The closest I found was this page to at least help me design the bus.  And although I thought the finger puppet idea was cute, Nolan already had farm animal finger puppets in his Barn page so I felt that would be redundant.  Plus I really liked the idea of using photographs of friends and family.

I started by making the bus in my Silhouette program.  quiet-book-wheels-on-the-bus-page-11I used the machine to cut my pieces out quiet-book-wheels-on-the-bus-page-6I had a brilliant idea for storing the pictures when not in use.  I would make a road on the bottom of the page for the bus to drive on and then sew a yellow zipper in the middle as the “line”!  Two birds, one stone:  a pocket and it adds detail to the page!  I bought a 9 inch zipper from Joann’s and got to work on the background. I sewed some blue fabric that I always use for the sky in quiet book pages (I’m finally starting to get a little low!) on the top two thirds of the page.  Then I cut out a rectangle of grey denim for the road.  I made it a bit longer than my page and cut it so it covered about the bottom third.  Then I cut a (not-very-straight) line across the middle for the zipper to go into.  If you look closely you can see that I didn’t cut it into two separate pieces–there was no need since my road was bigger than my page.quiet-book-wheels-on-the-bus-page-4I slipped the zipper in the opening and sewed it on by folding the raw edges of each side in about 1/4 inch on top of the zipper and stitching it down as close to the zipper as possible. quiet-book-wheels-on-the-bus-page-5As you can see it’s not straight at all (my M.O.) so I remedied that as much as I could when I sewed it onto the background.  To sew it on I folded the top edge about 1/4 inch down to hide the raw edge.  I didn’t bother doing that for the sides or bottom since they would be hidden when I sewed the pages together.quiet-book-wheels-on-the-bus-page-12Then I sewed all of the pieces onto my bus:  the black lines, the bumper, the stop sign and the lights. quiet-book-wheels-on-the-bus-page-9I placed it where I wanted it to go on the page, but didn’t sew it down yet; first I needed the velcro.  I cut a strip of the soft side of yellow velcro the size of each of my bus windows and sewed them on. quiet-book-wheels-on-the-bus-page-8I laid my bus on top to make sure the spacing was right and sewed it down.quiet-book-wheels-on-the-bus-page-7See that giant hole?  After the machine cut my bus out I couldn’t figure out why there was so much wasted space in between the driver’s window and the rest of the bus.  So I cut it out so more people could fit on the bus at the same time.  And then after I did that I realized why there was so much space there–for the doors!!!  Whoops!  I did a quick fix by sewing the scrap of yellow I cut off back onto the bus, and then the doors on top of that to hide it a bit (making sure to only sew the far side of each door down so they “open” and “close”.  I added another piece of yellow velcro there so someone could be “getting on the bus”.quiet-book-wheels-on-the-bus-page-10Originally I wanted the wheels to be able to spin, but that already happens on Nolan’s Fork Lift page so I decided I didn’t care that much for this one.  I found two matching white buttons and placed one in the “center” of each tire and then quickly hand sewed those through the tires and onto the page itself.  They wiggle back and forth, but don’t actually spin the whole way around, which is good enough for me.  And Nolan I’m sure.  As you can see I didn’t do a great job of making sure the buttons were centered.  It drives me crazy looking at it!!!  
quiet-book-wheels-on-the-bus-page-1Then I had Amanda email me pictures of friends and family.  I made them all the same size (about 1.5 x 1 inches), printed them off, laminated them, glued squares of scratchy yellow velcro on the back and voila!  Finished with Nolan’s Christmas present! quiet-book-wheels-on-the-bus-page-3quiet-book-wheels-on-the-bus-page-2

quiet-book-ladybug-page-9
Image

Ladybug Quiet Book Page

The next quiet book page I made for Nolan’s Christmas present was the Ladybug page.  It’s a super simple page that’s also very popular–it’s all over the internet.  I decided to do one similar to this one, with a black zipper and snaps sewn on the backs of the spots.

I started off by cutting all of my pieces.  I have a ton of red costume fabric leftover from J’s Snow White Cape that I made for her last Halloween.  It’s not the most ideal fabric to work with, but it’s the only thing I had in plain red so it would have to do.  I cut out two half circles.  I cut another half circle out of a scrap of regular black cotton for the head and then seven circles from black felt for the spots.  quiet-book-ladybug-page-1I decided on 7 because I have a package of assorted sized snaps from a previous project and 7 was the most I had in the same size.  I figured it’d be too confusing if the snaps were different sizes.snapsI just eyeballed all of the pieces and I think the sizing actually turned out pretty well.  That definitely could’ve gone another way, hahaha!

I started off by hand sewing the snaps onto the red fabric and black felt dots.  
quiet-book-ladybug-page-8quiet-book-ladybug-page-3I absolutely despise hand sewing.  I was tempted to just use velcro instead, but I know it’s good for kids to learn the snaps–it helps with fine motor skills.  And I really hate using snaps.  The previous project I used them on was a Seasons page for J’s quiet book and I sewed a crapload of them on before I realized that I did them backwards–I put the bottom piece on the top and vice versa.  And then if I remember correctly (it was so traumatizing for me that I think I blocked it out) I sewed them on the wrong way on the Seasons pieces; instead of poking that part that sticks out into the fabric, I sewed it facing out.  Goosebumps just remembering that.  I think there were quite a few tears shed those days…

On the plus side that meant that I double-checked everything before I sewed it down.  And again after I sewed it down.  And again before I did the next snap.  Etc.  And I’m happy to say that I learned my lesson really well last time and I had zero problems with it this time!  Minus it being boring and time-consuming, of course.

I picked up a 7 inch black zipper from Joann’s and sewed it on.  I used my cheating method, as always.  I simply fold the raw edge of the fabric in about 1/4 inch and sew it as close as I can to the zipper.  Then repeat for the other side.quiet-book-ladybug-page-2Next I figured out where exactly I wanted the ladybug to go and sewed the black head down.  Since I was using fabric and not felt, I made sure use a zigzag stitch instead of a straight stitch to help with the fraying. I sewed it along the bottom and around the curve.  quiet-book-ladybug-page-4Then the ladybug, once again with a zigzag stitch. quiet-book-ladybug-page-5I added some googly eyes and twisted a pipe cleaner around my finger for antenna.  I hot glued them down.  quiet-book-ladybug-page-6And that’s it!  The dots are kept inside of the ladybug when not in use and then snap on to make her look beautiful.  Easy peasy! quiet-book-ladybug-page-10quiet-book-ladybug-page-9